Every company tries its best to design a car that delivers the best performance, yet some more car mods can be used for upgrading car performance. People modify their vehicles to make them uniquely their own but performance is something that should not be compromised over design.
Insights of car mods For Car Performance
1. Free Flow Exhaust:
It is crucial to ensure free flow in the exhaust system. Inbuilt exhausts have catalyzers through which these gases pass before they are released into the environment. These obstructions disturb the free flow of gases. Aftermarket exhausts possess entirely different performance quality along with amazing throttle response. They can be used to improve a car’s performance.
2. Iridium Spark Plug:
It is generally assumed that fancy spark plugs increase your car’s performance, but it is not true. The spark plug is only responsible for igniting fuel in the engine. A traditional spark plug gets worn out with time, affecting your car’s performance. On the contrary, expensive spark plugs have a longer lifespan, and it does not affect your car’s performance for a long period.
3. Racing Wheels:
Racing wheels are not just for looks but also contribute to the car’s performance. These wheels are lightweight, absorbing and releasing heat more efficiently than standard steel wheels. Moreover, mass rotation is another factor that affects performance. Racing wheels are preferable as their rotation tendency is better than usual wheels.
4. Disk Brakes:
If you own a car, you must be aware of the importance of the braking system. Drum brakes lock the front tire, which suddenly stops the car if you break immediately. It might cause severe injury and fatal accidents. Discs are much easier to operate and preferable for all weather conditions. They allow smooth braking even in emergencies.
5. Intercoolers:
Car engines produce a lot of heat during power generation. Hot air from the exhaust should be cooled down before it enters the engine again. Intercoolers cool down the hot air, making it dense and better for the engine. It helps in increasing your car’s engine performance. Therefore, you should not compromise with cheap intercoolers and instil good ones.
6. Modifying ECU:
The Engine Control Unit (ECU) is responsible for running the engine smoothly. It regulates the air and fuel balance in the engine irrespective of the altitude and temperature. This air/fuel ratio is preset at the factory. However, you can program your ECU again according to the performance requirement. Some cars can be programmed through their OBD II ports.
7. Large Anti-Roll Bars:
Anti-roll bars connect your car’s front and rear parts. It ensures proper rigidity of the vehicle. Replacing the existing anti-roll bars with a larger diameter would increase the rigidity. This increased rigidity helps keep firm contact with the road and maintain proper grip. When you buy new anti-roll bars, it is recommended that they should be purchased as a set of two so that a consistent level is maintained between your car’s front body and rear body, especially during heavy bumps and sharp turns. Other names for Anti-Roll bars are anti-sway bars, stabilizer bars, etc.
8. Strut Tower Bar:
Similar to the Anti-Roll bars, the strut tower bar aligns your car’s body’s left and right parts. It is placed at the top of your car and directly aligns the driver’s and passenger’s sides. They are an excellent aftermarket installation for upgrading your car’s performance. They serve the same purpose as anti-roll bars to keep firm contact with the ground and maintain balance at sharp and curvy turns. However, installing a strut tower bar in the rear part of all cars is impossible, and you might need to remove it in case you need to work on your car’s engine.
Nitrous Kit Installation:
Nitrous oxide is a gas that contains more oxygen than normal air. It supplies oxygen directly to the engine intake, which occupies all the space that would have been taken by atmospheric air. These kits are installed for additional power delivery by your car. Moreover, it is a cost-effective mod that can improve your car’s performance.
Conclusion:
Most car companies design their cars in such a way that fulfils all the needs of their consumers. Still, you can purchase several aftermarket tools to enhance your car’s performance. However, it would help if you always went through all the pros and cons of the tool before installing it in your car.
